Grill Maintenance Tips

Electrode And Collector Box Installation

Replacing the electrodes on your grill when they wear is a simple maintenance procedure. Follow the instructions below, or download the PDF to complete. If you have any issues, our Customer Solutions department is happy to help you, just call 1-866-820-8686.


Electrode And Collector Box Installation

  1. Disconnect the electrode wire from the ignitor.
  2. Bend open collector box and remove screw. Remove the collector box and electrode.
  3. Slide new electrode wire through the hole in the collector box and the hole in the base. Fasten the collector box to the base.
  4. Bend the collector box closed (parallel to the burner). The gap from the tip of the electrode to the end of the box should be between 1/8” and 3/16”.
  5. Reconnect the electrode wire to the ignitor.
Electrode and Collector box installation


There are currently no comments, be the first to post one!

Post Comment

Only registered users may post comments.

Where To Buy

Where To Buy

Customer Solutions

T: 1-866-820-8686

E: [email protected]