Customer Care HotlineCustomer Care Napoleon dealer websiteDealers site map for napoleon gourmet grillsSite Map back to the index page Home
  
napoleon gourmet grills customer care section
 

Cleaning Pilot Orifice

Instructions are for PTH103 and PTH104 units only.

Note: Before working on your Patio Heater please ensure that all gas supply is disconnected. Tools needed: Phillips screwdriver, 2 wrenches, Paper clip or long needle.
   
Step 1
Remove front cover over valve to access pilot assembly.		 Step 2
Remove deflector (perforated screen around burner).
step1 Step 2
Step 3
Remove screw and nut holding pilot assembly
(located on the inside of the shield).
 Step 4
Gently pull pilot assembly out of housing
being careful not to pinch or kink pilot supply tube.
Step 3
3
Step 5
Loosen the nut at the base of the pilot where pilot supply attaches.
Use two wrenches, one on the bracket and one on the nut
(caution, pilot supply tube is very fragile).		 Step 6
Remove orifice.
Step 5
 remove
Step 7
Clean out all obstructions in the orifice
and upthrough the pilot hood. 		Step 8
Replace Pilot assembly into housing
and re-attach the screw and nut.
Step 7
 Step 3
   
  Gourmet Grills Outdoor Accessories Recipes Other Products Specials Customer Care Company Where to buy  
Napoleon® Fireplaces Napoleon® Furniture Napoleon® Waterfalls Napoleon® Heating & Cooling     BE SOCIAL WITH US!link to gourmet grills on twitter link to napoleon grills on facebook link to gourmet grills on facebook
Copyright © 2011 Napoleon Grills. All rights reserved.